Micro/Nano Transport and Printed Devices

Publications

Books & Book Chapters Articles Patents

BOOKS & BOOK CHAPTERS

  • Law, K.Y., and Zhao, H., “Design Principles for Robust Superoleophobicity and Superhydrophobicity”, in Ras, R. and Marmur, A. (Eds.) Non-Wettable Surfaces: Theory, Preparation and Applications, Royal Society of Chemistry, 2016
  • Law, K.Y., and Zhao, H., Surface Wetting: Characterization, Contact Angle, and Fundamentals, Springer Science+Business Media, 2015

PEER-REVIEWED ARTICLES

  • Yang, Y., Zhao, H., “Water-Induced Polymer Swelling and its Application in Soft Electronics”, Applied Surface Science, 2021, https://doi.org/10.1016/j.apsusc.2021.151895
  • Li, W., Yang, Y., Ehrhardt, C.J., Lewinski, N., Gascoyne, D., Lucas, G., Zhao, H., Wang, X., “3D Printing of Antibacterial Polymer Devices Based on Nitric Oxide Release from Embedded S‑Nitrosothiol Crystals”, ACS Applied Bio Materials, 2021, 4, 10, 7653-7662
  • Joshipura, I.D., Persson, K.A., Truong, V.K., Oh, J., Kong, M., Vong, M.H., Ni, C., Alsafatwi, M., Parekh, D.P., Zhao, H., Dickey, M.D. “Are Contact Angle Measurements Useful for Oxide-Coated Liquid Metals?” Langmuir, 2021, 37, 10914-10923
  • Tian, S., Zhao, H., Lewinski, N., “Key Parameters and Applications of Extrusion-Based Bioprinting”, Bioprinting, 2021, 23, e00156
  • Yang, Y., Duan, S., Zhao, H., “Highly Conductive Silicone Elastomers via Environment- Friendly Swelling and In Situ Synthesis of Silver Nanoparticles”, Advanced Materials Interfaces, 2021, 2100137
  • Li, Z., Al-Milaji, K.N., Zhao, H., Chen, D.R., “Ink Bridge Control in the Electrohydrodynamic Printing with a Coaxial Nozzle”, Journal of Manufacturing Processes, 2020, 60, 418-425
  • Al-Milaji, K.N., Huang, Q., Li, Z., Ng, T.N., Zhao, H., “Direct Embedment and Alignment of Silver Nanowires by Inkjet Printing for Stretchable Conductors”, ACS Applied Electronic Materials, 2020, 2, 3289-3298
  • Zhao, Y.Q., Sun, Y., Zhang, Y., Ding, X., Zhao, N., Yu., B., Zhao, H., Duan, S., Xu, F.J., “Well-Defined Gold Nanorod/Polymer Hybrid Coating with Inherent Antifouling and Photothermal Bactericidal Properties for Treating an Infected Hernia”, ACS Nano, 2020, 14, 2, 2265-2275
  • Al-Milaji, K.N., Gupta, S., Pecharsky, V.K., Barua, R., Zhao, H., Hadimani, R.L., “Differential effect of magnetic alignment on additive manufacturing of magnetocaloric particles”, AIP Advances, 2020, 10, 015052
  • Al-Milaji, K.N., Hadimani, R.L., Gupta, S., Pecharsky, V.K., Zhao, H., “Inkjet Printing of Magnetic Particles Toward Anisotropic Magnetic Properties”, Scientific Reports, 2019, 9, 16261.
  • Al-Milaji, K.N., Zhao, H., “New Perspective of Mitigating the Coffee-ring Effect: Interfacial Assembly”, Journal of Physical Chemistry C, 2019, 123, 12029-12041 (invited review paper)
  • Li, Z., Al-Milaji, K.N., Zhao, H., Chen, D.R., “Electrohydrodynamic (EHD) jet printing with a circulating dual-channel nozzle”, Journal of Micromechanics and Microengineering, 2019, 29, 035013
  • Al-Milaji, K.N., Zhao, H., “Probing the Colloidal Particle Dynamics in Drying Sessile Droplets”, Langmuir, 2019, 35, 2209-2220.
  • Huang, Q., Al-Milaji, K.N., Zhao, H., “Inkjet Printing of Silver Nanowires for Stretchable Heaters”, ACS Applied Nano Materials, 2018, 1, 4528-4536.
  • Al-Milaji, K.N.,  Radhakrishnan, V., Kamerkar, P., Zhao, H., “pH-Modulated Self-Assembly of Colloidal Nanoparticles in a Dual-Droplet Inkjet Printing Process”, Journal of Colloid and Interface Science, 2018, 529, 234-242
  • Secondo, R., Al-Milaji, K.N., Ng, T.N., Zhao, H., Kinsey, N., “Numerical Characterization of Monolayer Ink-Jet Printed Polystyrene Lattice”, CLEO: Applications and Technology, JTh2A. 80, 2018
  • Al-Milaji, K.N., Secondo, R.R., Ng, T.N., Kinsey, N., Zhao, H., “Interfacial Self-Assembly of Colloidal Nanoparticles in Dual-Droplet Inkjet Printing”, Advanced Materials Interfaces, 2018, 5, 1701561 (Highlighted as Inside Cover)
  • Majewski, C., Perkins, A., Faltz, D., Zhang, F., Zhao, H., Xiao, W., “Design of a 3D Printed Insole with Embedded Plantar Pressure Sensor Arrays”, Proceedings of UbiComp/ISWC’17 (Ubiquitous Computing/ International Symposium on Wearable Computers), 2017
  • Al-Milaji, K.N., Zhao, H., “Mask-assisted Electrospray for Superoleophobic Surfaces: An Experimental and Numerical Study”, Surface and Coatings Technology, 2017, 316, 146-154
  • Al-Milaji, K.N., Zhao, H., “Fabrication of Superoleophobic Surfaces by Mask-assisted Electrospray”, Applied Surface Science, 2017, 396, 955–964
  • Chen, H., Tang, T., Zhao, H., Law, K.Y., Amirfazli, A.,  “How pinning and contact angle hysteresis governs quasi-static liquid drop transfer”, Soft Matter, 2016, 12, 1998-2008
  • Ma, J., Mantell, D., Mizes, H., Yang, X., McConville, P., Zhao, H., “Drop coalescence on non-absorbent coated substrates”, Proceedings of the 31st International Conference on Digital Printing Technologies and Digital Fabrication, 2015, 457-461
  • Song, H.Q., Li, R.Q., Duan, S., Yu, B., Zhao, H., Chen, D.F., Xu, F.J., “Ligand-functionalized degradable polyplexes formed by cationic poly(aspartic acid)-grafted chitosan–cyclodextrin conjugates”, Nanoscale, 2015, 7, 5803-5814
  • Yan, P., Wang, R., Zhao, N., Zhao, H., Chen, D.F., and Xu, F.J., “Polycation-functionalized gold nanoparticles with different morphologies for superior gene transfection”, Nanoscale, 2015, 7, 5281-5291
  • Zhang, J.L., Zhao, H., “Pinning and Wetting Stability of Liquids on Superoleophobic Textured Surfaces”, Surface Innovations, 2014, Vol. 2, SI2, 103-115
  • Zhao, H., Park, K.C., Law, K.Y., “Effect of Surface Texturing on Superoleophobicity, Contact Angle Hysteresis, and Robustness”, Langmuir, 2012, 28 (42): 14925–14934
  • Zhao, H., Law, K.Y., “Directional Self-cleaning Superoleophobic Surface”, Langmuir, 2012, 28 (32): 11812–11818
  • Zhao, H., Law, K.Y., “Super Toner and Ink Repellent Superoleophobic Surface”, ACS Applied Materials and Interfaces, 2012, 4, 4288−4295
  • Zhao, H., Law, K.Y., Sambhy, V., “Fabrication, Surface Properties and Origin of Superoleophobicity for a Model Textured Surface”, Langmuir, 2011, 27 (10): 5927–5935
  • Samuel., B., Zhao, H., Law, K.Y., “Study of Wetting and Adhesion Interactions between Water and Various Polymer and Superhydrophobic Surfaces”, Journal of Physical Chemistry C, 2011, 115 (30): 14852–14861
  • Zhao, H., Law, K.Y., “Directional Self-cleaning Surface Design for Ink Jetting Devices”, Proceedings of 26th International Conference on Digital Printing Technologies and Digital Fabrication, 2010, 171-173
  • Law, K.Y., Zhao, H., Samuel, B., “Adhesion of Water on Flat Polymer Surfaces and Superhydrophobic Surfaces”, Proceedings of the 2010 NSTI Nanotechnology Conference and Expo, 2010
  • Zhao, H., Liu, X., Tse, S.D., “Effects of Pressure and Precursor Loading in the Flame Synthesis of Titania Nanoparticles”, Journal of Aerosol Science, 2009, 40(11): 919-937
  • Law, K.Y., Zhao, H., “Do We Need Better Materials than Teflon in Marking”, Proceedings of the 25th International Conference on Digital Printing Technologies (NIP25) and Digital Fabrication, 2009
  • Law, K.Y., Zhao, H., “Effects of Surface Texture and Chemistry on Surface Hydrophobicity and Oleophobicity”, NSTI-Nanotech 2009, ISBN 978-1-4398-1784-1, 3
  • Zhao, H., Liu, X., Tse, S.D., “Control of Nanoparticle Size and Agglomeration through Electric-field-enhanced Flame Synthesis”, Perspective article (invited), Journal of Nanoparticle Research, 2008, 10: 907–923
  • Xu, F., Zhao, H., Tse, S.D., “Carbon Nanotube Synthesis on Catalytic Metal Alloys in Methane/Air Counterflow Diffusion Flames”, Proceedings of the Combustion Institute, 2007, 31:1839-1847
  • Xu, F., Zhao, H., Sun, G., Tse, S.D., “Direct Flame Synthesis of Carbon Nanotube on Metal Alloys and Metal Oxides”, Proceedings of 44th Aerospace Sciences Meeting and Exhibit, 2006, AIAA 2006-1530
  • Tse, S.D., Zhao, H., “Dynamics of Flame Propagation from Localized Ignition in Rich Hydrogen/Air Mixtures: Effects of Elevated Pressure and Temperature”, Combustion Science and Technology, 2005, 177:559-578
  • Zhao, H., Rapaka, V., Tse, S.D., “Combustion Synthesis of Non-agglomerated Al2O3 and TiO2 Nanopowders in Uniform Electric Fields”, Proceedings of 43rd Aerospace Sciences Meeting and Exhibit, 2005, AIAA 2005-362
  • Xu, F., Zhao, H., Rapaka, V., Tse, S.D., “Catalytic Combustion Synthesis of Carbon Nanotubes”, Proceedings of 43rd Aerospace Sciences Meeting and Exhibit, 2005, AIAA 2005-542
  • Zhao, H., Xue, D.S., “Gas-Liquid Mixer on Multiphase Pump for Experimental Analysis and Homogenizer for Field Use”, China Petroleum Machinery, 2000, 28(10), 6-8
  • Ban, Y.T., Zhao, H., Xue, D.S., “Performance Prediction Model of Helico-Axial Multiphase Pump”, Journal of Engineering Thermophysics, 2000, 21(2), 187-190
  • Zhao, H., Xue, D.S., “Influence of Operating Parameters on the Performance of Multiphase Rotordynamic Pumps”, China Petroleum Machinery, 2000, 28(4), 19-22

Back to Top

PATENTS AND PATENT APPLICATIONS

  1. 9,139,002, Method for making an inkjet print head front face having a textured superoleophobic surface
  2. 9,096,062, Manufacturing process for an ink jet printhead including a coverlay
  3. 9,073,323, Process for thermally stable oleophobic low adhesion coating for inkjet printhead front face
  4. 9,050,807, Process for bonding interstitial epoxy adhesive for fabrication of printhead structures in high density printheads
  5. 9,004,648, Inkjet printheads containing epoxy adhesives and methods for fabrication thereof
  6. 8,931,890, Method and apparatus for leveling a printed image and preventing image offset
  7. 8,910,380, Method of manufacturing inkjet printhead with self-clean ability
  8. 8,888,250, Thermal bubble jetting mechanism, method of jetting and method of making the mechanism
  9. 8,870,345, Method of making superoleophobic re-entrant resist structures
  10. 8,851,630, Low adhesion sol gel coatings with high thermal stability for easy clean, self cleaning printhead front face applications
  11. 8,708,458, Superoleophobic glass devices and their methods
  12. 8,562,110, Ink jet print head front face having a textured superoleophobic surface and methods for making the same
  13. 8,544,987, Thermally stable oleophobic low adhesion coating for inkjet printhead front face
  14. 8,540,346, Patterned metallization on polyimide aperture plate for laser-ablated nozzle
  15. 8,534,797, Superoleophobic and superhydrophobic devices and method for preparing same
  16. 8,506,051, Process for preparing an ink jet print head front face having a textured superoleophobic surface
  17. 8,475,704, Fabrication of printhead nozzle plate coating with self cleaning and high drool pressure by electrospinning technique
  18. 8,384,748, Fabrication of improved aluminum rollers with low adhesion and ultra/super hydrophobicity and/or oleophobicity by electrospinning technique in solid ink-jet marking
  19. 8,348,390, Enhancing superoleophobicity and reducing adhesion through multi-scale roughness by ALD/CVD technique in inkjet application
  20. 8,292,404, Superoleophobic and superhydrophobic surfaces and method for preparing same
  21. 8,285,184, Nanocomposites with fluoropolymers and fluorinated carbon nanotubes
  22. 8,226,207, Coating for an ink jet printhead front face
  23. 8,213,849, Inductively heated carbon nanotube fuser
  24. 8,168,287, Fuser member
  25. 8,096,649, Image conditioning coating
  26. 8,086,154, Nanomaterial heating element for fusing applications
  27. 7,970,332, Oil less fusing using nano/micro textured fusing surfaces
  28. 20130093814, Self cleaning printhead
  29. 20140349071, Com/iphone method of making superoleophobic re-entrant resist structures
  30. 20140342160, B-stage film adhesive compatible with aqueous ink for printhead structures interstitial bonding in high density piezo printheads fabrication for aqueous inkjet
  31. 20140292930, Processing and application of liquid epoxy adhesive for printhead structures interstitial bonding in high density piezo printheads fabrication

Back to Top